US Made Single Screw M16 M4 AR15 Magazine Coupler

ismadeinusMade In USA
In stock


Charley world on shelf

One Screw Mag Grip Connecting Assembly


1. Adjust screw out fully, screw should be hardly engaged.

2. Place Mag Grip unit around magazines making sure that large part of assembly is on the front of the magazines. Stagger magazines so that the right one is about 1.5 inches lower than the left. This grip will sit at the bottom of the edge of the left of the magazine.

3. Tighten screw until Mag Grip is holding magazines snugly.

4. Insert magazine assembly into unloaded firearm and adjust to fit tour needs Make sure you can operate operating handle, ejection port cover, safeties and other operation features.

5. Tighten screw until magazines are firmly in place.

Write Your Own Review
You're reviewing:US Made Single Screw M16 M4 AR15 Magazine Coupler
Your Rating